Skip to content
The Fab Lab

NeoDen FP2636 Machine Safety Manual

NeoDen FP2636 Safety Manual

Machine Name: NeoDen FP 2636 Solder Stencil

Location: The Fab Lab

Version: v1.0

Last Updated: 4/06/2026

Responsible Student Worker: Luca Nealon

Linked Operations Manual: Operations Manual

1. Purpose of This Safety Manual

Section titled “1. Purpose of This Safety Manual”

This document outlines the minimum safety information required to operate the NeoDen FP 2636 in The Fab Lab. It focuses on:

  • Hazards that can cause injury or damage
  • Required protective measures
  • Emergency response procedures

This document does not teach you how to operate the machine. Refer to the linked Operations Manual for usage instructions.

2. Who May Use This Machine

Section titled “2. Who May Use This Machine”

This machine may be used by:

  • All Fab Lab users

Usage conditions:

  • Staff Presence
  • Safety Manual Acknowledgement
  • Operations Manual Acknowledgement
  • Solder Paste is Lead Free

3. Primary Hazards

Section titled “3. Primary Hazards”

Be aware of the following hazards when using this machine:

  • Pinch Points

  • Hazardous chemicals

  • Note that solder paste containing lead is not permitted for use

4. Required Personal Protective Equipment (PPE)

Section titled “4. Required Personal Protective Equipment (PPE)”

The following PPE is required when operating this machine:

  • Nitrile Gloves
  • No loose fitted clothing or jewelry

5. General Safety Rules

Section titled “5. General Safety Rules”

Always follow these rules when using this machine:

  • Keep hands, hair, clothing, and loose items clear of moving parts and solder paste
  • Do not operate the machine if you are unsure how to proceed

6. Incident & Injury Response

Section titled “6. Incident & Injury Response”

If an incident occurs:

  1. Stop the machine use
  2. Move to a safe distance
  3. Notify Fab Lab staff immediately
  4. Rinse any solder paste from hands and body thoroughly
  5. For injuries, staff will follow Fab Lab emergency procedures

7. Chemical & Material Safety

Section titled “7. Chemical & Material Safety”
  • SOLDER PASTE MAY CONTAIN HARMFUL SUBSTANCES

8. Acknowledgement

Section titled “8. Acknowledgement”

By using this machine, you acknowledge that:

  • You have reviewed this Safety Manual
  • You understand the primary hazards and required precautions
  • You will follow all of The Fab Lab safety rules
  • You will ask staff for help if you are unsure or uncomfortable

End of Safety Manual